Study On The Effect Of Spur Gear On Mechanical Application- A Comprehensive Review
DOI:
https://doi.org/10.47392/irjash.2020.14Keywords:
Micro pitting, EHL model, design parameters, spur gearsAbstract
The gears generate high stresses in the mating positions over the teeth when transmitting the power as they alter the rotation rate of the machine shaft. The object of this study is to determine the magnitude of the stresses on a spur gear used in the lathe machine for operations such as boring, facing. The friction power losses in spur gears can be measured as the integral, multiplied by the friction coefficient and the elemental slipping, of the normal load along the entire contact line. A full analysis of the effect on efficiency of the design parameters (number of teeth, gear ratio, pressure angle, addendum shift coefficient, etc
Downloads
Published
2020-02-28
Issue
Section
Review Articles
License
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.