An Enhancement of Properties on Al7075 and Al6061 Dissimilar Materials Welded by TIG Process
DOI:
https://doi.org/10.47392/irjash.2020.47Keywords:
Tungsten Inert Gas Welding, HAZ, Tensile, Bending, Impact, Micro-hardnessAbstract
Aluminium alloy was a predominant metal among alloys elements. The aluminum alloys like Al7075 and Al6061 which has the major elements of Zn, Mg, Cu, Si with which it will improve the hard-brittle crystalline structure and conductivity. To enhance the properties of dissimilar joint metal, TIG (Tungsten Inert Gas) welding is propagated. Mechanical properties like Tensile, Impact, Bending, micro-hardness and the study about microstructure analysis were carried out. As a result, the energy absorbed by the dissimilar joint metal is 16J and the hardness of dissimilar joint metal is 51.3HV.It revealed that, there is a high impact strength and micro-hardness properties. Consequently, the microstructure (HAZ) image exhibits good bonding strength and sufficient plastic deformation was improved due to fine distribution of grains.
Downloads
Published
Issue
Section
License
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.